How Colloidal Silver Beats Toxic Mold Infections How Colloidal Silver Beats Toxic Mold Infections

How Colloidal Silver Beats Toxic Mold Infections

By Steve Barwick, author, The Ultimate Colloidal Silver Manual

Mold infections in humans are growing more and more prevalent. And so are the lawsuits from people who had to suffer through severe medical problems due to long-term infections from mold contamination in their homes, offices or other buildings.

For example, according to Wikipedia:

  • In 2003, The Tonight Show former co-host Ed McMahon received $7.2 million from insurers and others to settle his lawsuit alleging that toxic mold in his Beverly Hills home made him and his wife ill and killed their dog.
  • That same year environmental activist Erin Brockovich received settlements of $430,000 from two parties and an undisclosed amount from a third party to settle her lawsuit alleging toxic mold in her Agoura Hills, California, home.
  • In 2006, a Manhattan Beach, California family received a $22.6 million settlement in a toxic mold case. The family had asserted that that moldy lumber had caused severe medical problems in their child.
  • That same year, Hilton Hotels received $25 million in settlement of its lawsuit over mold growth in the Hilton Hawaiian Village’s Kalia Tower.
  • In 2010, a jury awarded $1.2 million in damages in a lawsuit against a landlord for neglecting to repair a mold-infested house in Laguna Beach, California.[66] The lawsuit asserted that a child in the home suffered from severe respiratory problems for several years as a result of the mold.
  • In 2011, in North Pocono, Pennsylvania, a jury awarded two homeowners $4.3 million in a toxic mold verdict.

Indeed, over $3 billion has been paid out by U.S. insurers, in one recent year alone. And in any particular year, there often as many as 10,000 mold-related lawsuits pending in U.S. state courts.

According to Wikipedia, “When mold spores are present in abnormally high quantities, they can present especially hazardous health risks to humans after prolonged exposure, including allergic reactions or poisoning by mycotoxins, or causing fungal infection.”

Mold is Everywhere

According to the CDC, “There is always some mold everywhere – in the air and on many surfaces. Molds have been on the Earth for millions of years. Mold grows where there is moisture.”

Indeed, according to the website Poison.org, there are as many as 300,000 different species of mold. And it’s ubiquitous, meaning, you can find it everywhere. For example, mold spores are one of the most common components in household and workplace dust.

Symptoms of Mold Infection or Exposure

According to Dr. Axe, there are several common symptoms of mold infection in humans. These include:

  • Headaches
  • Chronic fatigue
  • Fever
  • Eye irritation
  • Sinus irritation
  • Sneezing
  • Rashes
  • Irritation to the mucous membranes of the mouth, nose and throat
  • Chronic coughing
  • Shortness of breath

Dr. Axe goes on to say:

Black mold symptoms are even worse if the black mold exposure is severe, has lasted for a long time or if the individual has a mold allergy. Symptoms could include nausea, vomiting, cognitive dysfunction (memory loss), immune system dysfunction, as well as bleeding in the nose and lungs. Studies have also linked household mold exposure to depression.”

Other experts have linked mold infections to increased incidences of asthma and other serious lung and breathing conditions.

And, of course, systemic mold infections are common in people with impaired immune systems, such as those who have HIV/AIDS, or who are taking immunosuppressant medication.

Does Colloidal Silver Kill Mold?

Mold Definition from WikipediaMold is just another term for the many varieties of multi-celled fungi, which are also called filamentous fungi because of the long, multi-celled filaments that characterize them.

(Single-celled fungi are called yeasts. And other fungi, such as Candida, are dimorphic, meaning they can be composed of both individual fungal cells and of filamentous cells.)

Numerous studies have found silver to be highly effective against various kinds of mold/fungi, including those that infect humans, and those that infect plants.

The following articles and studies document silver’s powerful anti-fungal (i.e., anti-mold) properties:

In a recent YouTube video demonstration, an individual calling himself “Jay BEE” took a coffee cup he’d left out in his garage that he found mold growing in, and added some colloidal silver to see if it would kill the mold. He found that just a small amount of colloidal silver added to the mold-infested coffee completely eradicated the mold.

Here are the very short one-minute videos, so you can see for yourself:

If you watched the videos, you know that it only took a very small amount of colloidal silver to obliterate the mold in that coffee cup.

So will colloidal silver help with a mold infection in humans?

Unfortunately, to the best of my knowledge, no “Big Pharma”-style clinical studies have been conducted to see, specifically, whether or not colloidal silver will stop a mold infection in humans who have been exposed to high levels of mold.

However, next, we’re going to look at a few anecdotal accounts of colloidal silver stopping mold infections in humans, which I think you’ll find fascinating:

Anecdotal Accounts: Silver Works!

In spite of the lack of clinical documentation, many colloidal silver users have never-the-less written in over the years to say they’ve used colloidal silver to wipe out mold infections they’d ended up with after living in a mold-ridden home or apartment.

For example, here’s a very long but interesting testimonial I received from a person who had been infected in the lungs with mold from a house that had mold hidden inside the walls:

Hi Steve, I battled Sinus issues for 25 years, 5 surgeries, including 2 for staph in my inner ear and mastoid.

I worked for a tobacco Company and was continually exposed to smoke and became very allergic to it. I finally retired, moved to a new house with no smoke.

Approximately 8 months to a year after I moved in the house, I had another bad sinus infection which required surgery. This time it was on the opposite side from where it had always been before.

After surgery, I felt better for a few weeks, then about 6 weeks later, infection was back even worse. My ENT told me he did not think this was a sinus issue. He said it looked more like a fungus. I asked why I had fungus in my sinus and what caused it? He replied, “it is caused by breathing mold or mildew.

He asked if there was mold in my house. I replied that I purchased a new house, it couldn’t have mold in it. I checked the outside of my home and found evidence that did point to the possibility of mold. The house still under warranty, I requested the developer make appropriate repairs. He refused to admit anything was wrong with the house.

A culture sent off by my Doctor indeed confirmed it was fungus caused by mold. I hired a contractor to replace all window facings that had mold or rotten spots that could be detected.

What the contractor found was my entire bedroom outside wall was horribly molded. The wafer board had just dissolved inside the wall, and I had been breathing it for 2 years by the time it was repaired.

The doctor immediately put me on an aggressive treatment of 3 drugs mixed with Saline solution in a nebulizer, plus the strongest antibiotic pill he could prescribe to treat fungus. (30 days of the pills cost $3,000.00, my insurance only paid $2500.00). I had to pay the $500. Per month. This treatment went on for about a year, but the fungus was not going away.

My son had been trying to get me to try Silver Water. I was ready to try something, so I ordered the colloidal silver generator and started using the silver water.

When I started using the silver water, I stopped all other treatments. When I went back to my doctor 6 weeks later, I told him what I had done. After doing a scope, he said the lining in my sinus area was showing some signs of improvement, and to keep using the silver water.

Four or five months later he released me, saying I should continue to use the silver water.

I have gone 7 months without having to see him yet. I drink 1 ounce of silver water every morning and every night. I do it after I brush my teeth so I don’t forget.

I also spray it into my nose daily to assist with allergies. I use it on cuts, bites, burns and even on my face when it breaks out from eating tomatoes.

I got a neighbor who was about to lose his leg which had been infected for two years, to try it. His leg healed up in 6 weeks….His doctors told him they did not know if it would be safe to drink silver water. He takes it daily now.

Silver Water saved my life, and it has kept me from catching the flu or stomach bug from people I am around, Thank you, thank you.”

– Junie S.

Another individual wrote in to say:

My brother had black mold fall into his eye doing a repair on a plaster ceiling from a leak. Eye swelled up bad! He soaked a cotton ball with it & the next few days it was back to normal. I take it when a cold is coming on, seems to help???!

– Spinelli S.

Mold Testimonial from Spinelli

And finally, another colloidal silver user wrote in to say:

After being very sick for weeks, my husband discovered toxic black mold in showerhead. All of my symptoms are text book for mold illness. I was given colloidal silver at my health food store. This was the spray form and it cleared out the fungus in my sinus and ear.”

– Sharie J.

As you can see, colloidal silver seems to work like gangbusters against mold infections in humans.

And guess what? It kills mold on plants and sprouts, as well. For example, here’s a testimonial from a gentleman who sprouts seeds for birds, and uses colloidal silver to stop mold growth in the sprouts:

“I have a bird avairy. I soak bird seed for them. The seed germinates and creates sprouts. It is very good for the birds.

One of the dangers of soaking bird seed is that you run the risk of developing mold in the seed. I have been using colloidal silver in the sprouting water, and I have not had any mold at all in soaked seed.

The birds are doing great. They love the sprouts.”

– Victor H.

What’s more, Delia M. wrote to say that colloidal silver keeps her homemade baby wipes free of mold. She states:

“I make my own cloth baby wipes and was having a problem with them molding before they were all used up ….I started using a 1/4 of silver with my mix and no more mold.”

In another instance, a woman named Glenda M. wrote in to tell me that she’d given some colloidal silver to a friend who apparently had mold growth in her bathroom. She stated that her friend, “…put the colloidal silver into a spray bottle and sprayed her bathroom, and instantly the mold disappeared!!

Lisa B. wrote to say that she too has had success using colloidal silver against mold that infected her houseplants. She stated:

“I made a 6 hour batch of colloidal silver and sprayed enough to just make it wet on some mold that had formed in the earth around a house plant. All signs of the mold are still gone after four days. Before that mold would have killed the plant.”

Using Colloidal Silver for Mold Infections

Many folks tell me that if they suspect a mold infection of the sinuses, they simply sniff colloidal silver up their nose through a nasal pump spray bottle, several times a day for up to a week.

Here’s a short video on using colloidal silver in a nasal pump spray or squeeze spray bottle.

If a mold infection of the lungs is suspected, most folks have told me they nebulize their colloidal silver. That’s to say, they use a medical nebulizer to turn colloidal silver into a fine, atomized mist that can be inhaled directly into the lungs several times a day until the mold symptoms are gone.

Here’s a pretty detailed article and short video on nebulizing colloidal silver.

And if an internal or systemic mold infection is suspected, most folks tell me they take several ounces of 10 ppm colloidal silver a day, for up to a week or even 10 days. They say they often notice symptoms being abated by day three or four.

Will Spraying Colloidal Silver On
the Mold Growing in Your Home Help?

While no clinical studies have been conducted to see if spraying colloidal silver on the mold common to homes would effectively kill such mold, a number of studies centered around adding silver nanoparticles to building materials indicate it most certainly would. For example:

In one clinical study, titled “Evaluation of Silver Nanoparticles Toxicity against Toxic Black Mold Stachybotrys chartarum,” researchers concluded that the application of silver nanoparticles to building materials and walls “could effectively protect indoor environments from mold development.”

The researchers continued by saying:

Silver nanoparticles attach to the cell membrane and penetrate the fungi. This produces a site with little molecular weight in center of fungi.

Then the silver nanoparticles attach to respiratory sequence of the fungal cell, and finally cell division stops which lead to cell death.

Silver nanoparticles also release silver ions in fungal cells, which increases the antifungal function.”

Finally, the researchers concluded by saying:

“Silver nanoparticles can be used effectively in the control of S. chartarum [the black mold fungus – ED].

Current results support the hypothesis that silver nanoparticles are suitable for formulating new types of fungicidal materials.

Their application to building materials could effectively protect indoor environments from mold development.”

In another study, titled “Antifungal Properties of Silver Nanoparticles Against Indoor Mould Growth,” researchers studied using silver against six different forms of indoor mold/fungi. They began their study as follows:

“The presence of moulds in indoor environments causes serious diseases and acute or chronic toxicological syndromes.

In order to inhibit or prevent the growth of microorganisms on building materials, the disruption of their vital processes or the reduction of reproduction is required.

The development of novel techniques that impair the growth of microorganisms on building materials is usually based on silver nanoparticles (AgNPs). It makes them an alternative to other biocides.

AgNPs have proven antibacterial activity and became promising in relation to fungi.”

The researchers then went on to state:

“It was found that the presence of AgNPs [i.e., silver nanoparticles] in concentrations of 30-200mg/l [i.e., 30-200 ppm] significantly decreased the growth of fungi.

…strong changes in mold’s morphology and color were observed after administration of silver nanoparticles.

These experiments have demonstrated the antifungal properties of silver nanoparticles against common indoor mould species.

Their application to building materials could effectively protect indoor environments from mould development.”

In other words, based on the results of their study, the researchers are recommending the use of silver nanoparticles in building materials in order to help prevent the growth of mold/fungus in homes, offices, apartments and more.

In another clinical study, this one titled “Building Materials with Antifungal Efficacy Enriched with Silver Nanoparticles,” researchers discovered that household paint enhanced with silver nanoparticles made walls virtually impervious to the growth of household mold/fungus. They wrote:

“Penicillium spp is the most frequently isolated fungus from infected internal building environments. In research conducted in archives and museums, it was found that these fungi dominated among isolated populations found on the walls and furniture (86.0-99.9%).

The most commonly isolated fungi were as follows: Alternaria spp (such as Alternaria alternata), Aspergillus spp (e.g. Aspergillus versicolor), Cladosporium spp (e.g. Cladosporium herbarum), Penicillium spp (e.g. Pennicillium carneum) and Rhizopus Nigricans.

Silicone paint with either a 2% or 3% silver nanoparticle content was characterized by very good efficacy of protection (grade 2), exceeding that of silicone paint with ACTICIDE® MBS biocide (grade 3).

The most satisfactory results were noted for plaster silicone with 1% silver nanoparticles, for plaster silicone with ACTICIDE® MBS and for the system with 1% silver nanoparticles and 0.1% ACTICIDE® EPW, whose evaluations were, respectively: 1, 0, and 0.

The present study demonstrated the effectiveness of silver nanoparticles at a concentration of 1-3%, corresponding to 5-15 ppm nanosilver.

The obtained protection matched or exceeded the results achieved by applying active fungicidal substances as biocides.

The use of silver nanoparticles at a concentration of 2% or 3% in the silicone paint is particularly noteworthy, because the efficiency of its use outperformed the known biocide.”

In short, the silver nanoparticles stopped fungal infestation of building materials even better than the use of commercial chemical biocides!

In another clinical study, this one titled “Biosynthesized Silver Nanoparticles to Control Fungal Infections in Indoor Environments,” the researchers also determined that adding silver nanoparticles to indoor house paint significantly reduced the growth of molds and fungus. The researchers concluded:

“The results revealed that the [paint] coating with silver nanoparticles… was the most efficient against fungal biofilm development.

As you can see from these studies, silver can indeed be an effective natural agent for control of mold/fungal growth in the home.

Using Colloidal Silver for Mold Growth in Your Bathroom

Using Colloidal Silver for Mold Growth in Your Bathroom

The bathroom is one of the easiest places for mold to grow, because bathrooms are often dimly lit, and you have dark spaces under cabinets or even in shower stalls. Plus there’s moisture and warmth – all three (darkness, warmth and moisture) being necessary for mold to grow.

That’s why I occasionally do “mold inspections” of our bathrooms, looking inside shower stalls, under bathroom cabinets, inside medicine cabinets, behind toilets and around baseboards.

Whenever I see mold in the bathroom, the first thing I do is spray it with colloidal silver and then leave it alone for a day, allowing the silver to air dry, and to kill off the mold and stop it from producing spores.

Then I use warm water and soap with a little added vinegar, plus a cleaning rag or scrub brush, to scrub away the dead mold from the area. (If it’s pretty bad, I also wear one of those little white face masks to make sure I don’t breathe in any mold spores that have yet to be killed off.)

Then, once the area is spotless clean and dry, I very lightly spray that same area again with colloidal silver, once again allowing it to air dry, in order to help stop mold from growing back in that same spot.

That’s it. My wife and I virtually never find mold growing in our bathrooms. But when we do, the colloidal silver trick takes care of it every time.

And as one person posted under a YouTube video on colloidal silver:

“I had some mold growing on the walls in my house due to humidity. I tested colloidal silver on it and I can literally see the mold disappearing before my eyes. Its kinda crazy, I had hoped it would work but I didn’t expect this kind of immediate result!”

That’s pretty much been my experience with colloidal silver, as well, when using it against mold in the home.

Mold Inside of the Walls of Your Home

For minor cases of mold growth inside the walls of your home, or in the attic or ceilings, the same trick I mentioned above for bathroom mold should work well.

As the Mold Blogger website states, in an article titled Preventing and Treating Mold Naturally, “Some people have successfully used colloidal silver to kill mold. Apply directly to the mold and allow it to dry completely.

But if the mold exposure is extensive, you might need to hire a professional to deal with eradicating it. The EPA recommends that any mold problem larger than 10 square feet be examined by an expert in mold treatment.

That’s because mold can actually penetrate and eat into the wood frame of the home, where colloidal silver wouldn’t necessarily be able to get to the mold. It can also infest the waferboard, particle board or even the drywall inside your walls. (As one mold expert put it, “Mold eats drywall for dessert.”)

In such a case, you’d have to find a local specialist to rid your home of the mold. But in milder cases, mold remediation is apparently something you can do yourself.

According to an article on the Family Handy Man website, titled “How to Remove Mold,” applying a mixture of bleach and water to the affected area often works. They write:

“Scrub the surface mold stains from walls and wood trim with a mixture of 1 qt. water and 1/2 cup bleach mold cleaner to kill the mold.

Use a soft brush and work until signs of the mold disappear.

After scrubbing the surfaces, simply allow the bleach solution to continue to penetrate the surfaces and dry.”

The article goes on to say that in stubborn or extensive cases of mold growth in the home, special precautions might have to be taken if you choose to do the mold clean-up yourself. They write:

“If you have to remove mold concentrations or perform any black mold removal covering more than a few square feet, where the musty odor is strong or where you find extensive water damage, we recommend that you take special precautions.

You want to not only avoid contaminating the rest of the house but also protect yourself from breathing high concentrations of spores and VOCs.

  • Wear old clothes and shoes that you can launder or throw away after the cleanup work.
  • Wear special N-95 or P-100 respirators, in addition to goggles and gloves.
  • Set an old box fan or a cheap new one in a window to ventilate the room while working. Throw it out when you’re done cleaning, because the spores are almost impossible to clean off. Tape plywood or cardboard around the window openings so the spores can’t blow back in.
  • Wrap and tape moldy carpeting in 6-mil plastic, and double-bag mold-infested debris in garbage bags for disposal.
  • To control airborne spores, moisten moldy areas with a garden sprayer while you work.
  • Turn off your furnace and air conditioner and cover ducts and doors to contain spores.
  • Keep your wet/dry vacuum outside when you vacuum.”

The rest of that article can be found here, including pictures of mold remediation in a home, with tips for cleanup and repair.

There are also a lot of YouTube videos (such as this onethis one and this one) demonstrating safe and effective ways to remove mold growth from your home.

I would add to these precautions that directly after attempting a mold clean-up yourself, you might want to consider spraying some colloidal silver into your sinuses several times throughout the course of the day, and/or inhaling into your lungs some atomized colloidal silver through a medical nebulizer – this, in order to help stop mold spores from colonizing your sinuses or lungs and starting an infection.

As you can see, colloidal silver can be a very valuable tool in dealing with mold infections. And it can be used quickly and effectively to help get rid of mild-to-moderate cases of mold growth within the home.

Where to Find Colloidal SilverImportant Addendum: Where to Find Colloidal Silver

If you’re brand new to colloidal silver usage and are wondering where to buy it, it’s important to know that you can find it in just about any well-stocked health food store in America.

It’s also available on Amazon and numerous other websites.

But it can be extremely expensive. In fact, because colloidal silver works so well against numerous forms of infection and disease, it has the highest price mark-up of any nutritional supplement in existence.

The amount of actual silver in a four-ounce bottle of colloidal silver is about five to 12 cents worth. (Yes, I said five to twelve cents.)

Yet because that small amount of silver is all it takes to decimate so many different kinds of infections, the manufacturers mark it up about 16,000%, charging a whopping $20 or $30 per bottle.

What’s more, manufacturers promoting the latest faddish colloidal silver product often charge far more per bottle — sometimes $35 to $50 for a tiny four-ounce bottle.

And people are more than willing to pay through the nose for these commercial colloidal silver products at health food stores because colloidal silver does indeed heal infections and prevent the spread of germs and disease faster and better than any other natural supplement on the planet!

So, commercially speaking, the retail price of colloidal silver at health food stores reflects its value to the consumer far more so than its true cost to produce. But here’s the good news:

Make Your Own High-Quality Colloidal Silver

Make Your Own High-Quality Colloidal Silver for Pennies!

As I mentioned, typical health food store prices for colloidal silver can range from $20 to $30 for a tiny, four-ounce bottle.

But with a brand new Micro-Particle Colloidal Silver Generator from The Silver Edge, you can make your own safe, pure, high-quality micro-particle colloidal silver for about 36 cents a quart!  In other words, you can make it at actual cost, just like the big colloidal silver bottlers do.

Compared to typical health food store prices, your first two one-quart batches literally pay for the entire cost of your new generator!  Do you know of any other health product that literally pays for itself the very first few times you use it? The savings are absolutely astonishing!

In fact, by making your own high-quality colloidal silver with a brand new Micro-Particle Colloidal Silver Generator from The Silver Edge, you’ll be as close to having FREE colloidal silver as you can get, and for the rest of your life!

You’ll never have to pay those exorbitant health food store prices again!

The new Micro-Particle Colloidal Silver Generator is now the world’s #1 best-selling colloidal silver generator. Here are just a few reasons why you should own one…

  • It pays for itself after your very first batch or two — your total cost to make your first one-quart batch is about 36 cents, compared to the $240 you’d pay at a health food store if you bought an equivalent amount (i.e., eight of those little 4-ounce bottles they normally sell for $30 apiece)!
  • Safe, simple to operate…No special skills needed…You just set the handy timer, plug it in, walk away, and three hours later you have a perfect batch of therapeutic quality micro-particle colloidal silver…every time!  Here’s a short pictorial demonstrating how astonishingly easy it is to use a new Micro-Particle Colloidal Silver Generator from The Silver Edge:

Step 1 How To Make Colloidal SilverStep 2 How To Make Colloidal Silver
Step 3 How To Make Colloidal Silver
Step 4 How To Make Colloidal Silver

  • Produces uncommonly small silver micro-particles as low as .8 nm. That’s a fraction of a single nanometer. Compare that to health food store colloidal silver which can contain silver particles as large as 200 nm to 1,000 nm (or even larger), and you’ll see why micro-particle colloidal silver is the very best there is!  Smaller particles mean your body can absorb and utilize up to 99% of the colloidal silver you take, compared to maybe 30% or 40% with many health food store brands!
  • Runs on standard household electricity, but uses less power than a tiny Christmas tree bulb — you won’t even see a blip on your electric bill!
  • Produces uniform, crystal clear batches every single time that store for months, or even years, without losing potency!
  • Can not produce silver chloride or unsafe substances — you get pure, therapeutic-quality micro-particle colloidal silver every time!

Just read through some of the testimonials below to see for yourself how you’ll save literally thousands of dollars per year by making your own colloidal silver with your brand new Micro-Particle Colloidal Silver Generator from The Silver Edge!

Customer Testimonials

Here’s what one customer recently wrote to tell us:

K Sullivan

“Owning a Micro-Particle Colloidal Silver Generator from The Silver Edge has given us the luxury of being able to use high-quality colloidal silver any time we need it.  And we never have to worry about the costs because it only costs a few pennies per quart to make!  It is without a doubt the single-best money-saving appliance in my entire house!

Best of all, the machine is very easy to use and easy to store. I was concerned about ease-of-use, but my fears were unfounded. After I got mine and used it, I immediately bought one and sent it to my 83-year-old mom, and she uses it regularly as well.

Now that I have a Micro-Particle Colloidal Silver Generator, I can use colloidal silver for everything — disinfecting the kitchen sinks, countertops, and the cutting board…spraying the toilet bowls, and the bathroom countertops and sinks…spraying it on my toothbrush to prevent bacterial growth…rinsing my mouth with it to prevent cavities and gum disease…you name it.

I even put it in the laundry rinse cycle when I do my linens, towels and kitchen rags, so I don’t have to wash them as frequently. It really keeps them fresh, and there’s never any mold or mildew anywhere in our house.

I also put some in the cat’s water bowl each day, and the dog’s too.  We use it in the bathtub for skin problems.  And of course, we drink it when our tummies are queasy, or when we feel a cold or flu coming on.  We also gargle with it in order to get rid of sore throats and sniff it up our noses to get rid of sinus problems.

My husband even sprays it on his hair in the mornings and has completely eliminated his lifelong dandruff problem.  And he sprays a little bit in his eyes from time to time, and now has no more recurrent problems with sties.”

— K. Sullivan, NM

And here’s what another happy customer wrote to say about the tremendous savings she’s achieved by no longer having to purchase her colloidal silver through health food stores:

Marie Wilkey

“We make a quart of colloidal silver at least once a week with the Micro-Particle Colloidal Silver Generator from the Silver Edge. I finally sat down and figured out how much this machine has been saving us.

By making our own colloidal silver we’ve saved $11,503.20 this year alone, compared to the cost of colloidal silver at our local health food store.

The cost for colloidal silver at our local health food store is $30 for a tiny four-ounce bottle. But with my Micro-Particle Colloidal Silver Generator, I can make eight times that amount (i.e., a full quart) for about 35 cents total cost.

If I were to purchase a quart of colloidal silver at the health food store, which would be eight of those tiny, four-ounce bottles, the cost would be a whopping $240 (i.e., 8 x $30 = $240) compared to the 35 cents I now spend to make a full quart!

Here’s the breakdown of our costs to make a full quart of colloidal silver with our Micro-Particle Colloidal Silver Generator: It costs us about a dollar for a gallon of steam-distilled water at Walmart.

So a quart of the steam-distilled water costs about 25 cents. And I estimate we use maybe a nickel’s worth of electricity and maybe another nickel’s worth of silver from the silver rods for every one-quart batch of colloidal silver we make. So that’s 35 cents a quart, all told, for each quart of micro-particle colloidal silver we make!

And frankly, considering how long the .9999 fine silver rods have lasted (over a year and a half, so far, for the most recent set), I think it’s probably even cheaper than that. But it’s the lifetime savings we’ve experienced that’s just mind-boggling to me.

For example, we’ve had our Micro-Particle Colloidal Silver unit for nearly five years now. And as I mentioned we make one quart per week, and we spend about 35 cents a week on making colloidal silver.

This means we save about $239.65 a week by not having to purchase a quart’s worth of colloidal silver at our local health food store.  So do the math: In just one month, the savings is $958.60…in one year, the savings is $11,503.20…and in five years we’ve saved approximately $57,516.00!

When you put pencil to paper and figure it out, it definitely takes you by surprise. You just think ‘No way. I must have multiplied that wrong.’

But it’s true. The savings is legitimately well over $11,000 a year over health food store prices for colloidal silver if you make and use a quart of colloidal silver a week like we do!  And we reap that incredible saving from the very reasonable $250 investment we made in purchasing our Micro-Particle Colloidal Silver Generator.

In their advertising literature, The Silver Edge says the unit completely pays for itself after your first couple of one-quart batches. But really, that’s quite an understatement when you realize the true extent of your savings!

Of course, once you start making your own colloidal silver with a Micro-Particle Colloidal Silver Generator from The Silver Edge, you don’t really think about how much you’re saving compared to health food store prices, because it just becomes a normal part of your everyday life. But the savings is nevertheless astonishing when you reflect on it.

What’s especially nice is being able to produce a significantly higher-quality colloidal silver than what’s generally available to the public through health food stores, especially at such a tiny, tiny fraction of the cost.”

— Marie Wilkey, SC

How To Make Colloidal Silver

The Bottom Line…

With a high-quality Micro-Particle Colloidal Silver Generator from The Silver Edge, you’ll never again have to pay exorbitant health food store or internet vendor prices for high-quality colloidal silver!

Indeed, your first batch or two will indeed completely pay for the entire cost of your generator, compared to health food store prices!

What’s more, you’ll be able to give colloidal silver away FREE to family members, friends, and neighbors, because you’ll be making it — literally — for only a few pennies per batch!

  • To learn more about this phenomenal new breakthrough in colloidal silver-making technology, click this link.
  • Or click this link to see literally hundreds of detailed customer reviews and testimonials on the Micro-Particle Colloidal Silver Generator.
  • And to save a whopping $100 on your order of a brand new Micro-Particle Colloidal Silver Generator, click this link!

Meanwhile, I’ll be back next week with another insightful article on colloidal silver….

Yours for the safe, sane and responsible use of colloidal silver,

Steve Barwick, author

The Ultimate Colloidal Silver Manual

Helpful Links:

FREE Colloidal Silver Safe Dosage Report

Colloidal Silver Secrets Group on Facebook

Make Your Own Colloidal Silver for Pennies

.9999 Pure Silver Wire for Making Colloidal Silver

Important Note and Disclaimer: The contents of this Ezine have not been evaluated by the Food and Drug Administration. Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof. The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics. He is not a doctor. Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice. Nothing reported herein is intended to diagnose, treat, cure or prevent any disease. The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage. Therefore, the information and data presented should be considered for informational purposes only and approached with caution. Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments, and opinions stated herein. All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional. Readers are solely responsible for their choices. The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine.

Copyright 2019 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.

Click the image above to learn more about the Micro-Particle Colloidal Silver Generator that allows you to make high-quality colloidal silver for less than 36 cents a quart, and is so easy to use, even my 88 year old mom uses one!


P.O. Box 84910
Phoenix, AZ 85071

Phone Orders/Customer Service: 1-888-528-0559 (M-F, 8am to 4pm AZ time)
FAX Orders: (602) 943-2363 (24 hours a day)
Tech Support: (760) 253-2988 (M-F 9am to 5pm CA time)

Email Sales/Customer Service: sales@thesilveredge.com
Email Tech Support: techsupport@thesilveredge.com

Copyright . No reproduction without the expressed written permission of The Silver Edge.

[IMPORTANT NOTE AND DISCLAIMER: We are not doctors. We are distributors of electronic appliances and nutritional supplements. Therefore we cannot and do not offer medical advice. Please do not call with medical questions. If you have a medical problem, please see your licensed physician. Self-treatment is not recommended. The FDA has not evaluated the information contained on this web site. Products distributed by The Silver Edge are not intended to diagnose, treat, cure or prevent any disease. Testimonials are the subjective experiences of our customers and are not intended to be construed as being prescriptive in nature, nor a guarantee that the usage methods described are safe, effective or reliable, nor a guarantee that your results will be the same; individual results may vary. Additionally, the contents of this web site are strictly for information purposes only, and should not in any way be construed as providing or attempting to provide medical advice. Information on this web site is derived from sources deemed to be accurate and reliable, but no guarantee, express or implied, can be made regarding the accuracy or reliability of same. Therefore readers are encouraged to verify for themselves and to their own satisfaction the accuracy and reliability of all reports, recommendations, conclusions, comments, and opinions. The Silver Edge does not make any claims or promises as to health benefits accruing from the use of any product. There is plenty of publicly available independent documentation -- both pro and con -- regarding the uses and efficacy of colloidal silver and its long history in health and medicine. For a comprehensive overview, you may want to obtain a copy of The Ultimate Colloidal Silver Manual (547 pages, from Life & Health Research Group, LLC, 1-888-846-9029). Or see the link above to "Some Interesting Sources of Information on Colloidal Silver." Colloidal silver generators are electronic appliances designed to produce high-quality silver colloid. They are not medical devices. The Silver Edge specifically disclaims responsibility or liability for any loss or hardship that may be incurred by the reader as a result of the application of any information included on this web site, or as a result of the use or misuse of any electronic product or nutritional supplement. You are solely responsible for your health and nutrition choices. Anyone with additional information on colloidal silver is encouraged to write to The Silver Edge at the address directly below, so that it can be shared with others who may be interested.]