Share this page on social networks
L I N K S

Search this site
powered by
About Our Products Additional Important Product Information Articles About Colloidal Silver About The Silver Edge

Share this page on social networks

amber glass storage bottle 2.jpgHow to Store Colloidal Silver Correctly for Maximum Potency

 

Whether you use a commercial brand of colloidal silver, or make your own colloidal silver, how long it remains potent during storage depends a lot upon how you store it. 

 

Incorrect storage of colloidal silver can result in the silver particles falling out of suspension and coating the bottom of your storage container like a fine gray silt. 

 

Here’s some quick tips on proper storage of your colloidal silver, so you can enjoy maximum potency no matter how long it’s stored…

 

Hi, Steve Barwick here, for The Silver Edge


In a previous article, I explained how to check your colloidal silver batches to make sure the silver is still potent.  You can read that short article, here. 

But how do you maximize the longevity and prolong the potency of your colloidal silver batches while they’re in storage? 

 

There are three basic factors you need to be aware of:

 

Factor #1:  Bright Light

 

First and foremost, colloidal silver needs to be stored out of bright light. 

 

That’s because prolonged exposure to bright light causes silver particles to oxidize, then lose their electrical charge and fall out of suspension, dropping to the bottom of your storage container.   

 

As the silver particles begin to fall out of suspension, they’ll coat the bottom of your storage container with a fine gray silt-like coating. 

 

If you see that gray, silt-like coating covering the entire bottom of your colloidal silver storage container, you know that particular batch of colloidal silver is fast losing potency. 

 

That’s because, as more and more silver particles begin to oxidize and drop to the bottom of the container, fewer and fewer electrically-charged silver particles will be left suspended in the water.  So when you use the batch, not nearly as many silver particles will be available to kill bacteria, stimulate healing and boost immunity.   

That’s why most people store their colloidal silver in a dark glass storage container.  Most people either use dark amber glass storage bottles with plastic lids (like the one shown in the image at the top of the page), or the colored decorative Ball canning jars like the one shown on this web page.   

 

Here’s the good news:  If your colloidal silver is stored in a dark glass container, it can safely be stored on a kitchen counter top instead of in a dark cabinet, because the dark color on the glass bottle filters out the spectrum of light that causes silver particles to oxidize.

Cobalt blue glass storage bottles can also be used, such as the one to the left. 

 

A lot of people also use old dark-colored wine bottles, Bailey’s Irish Cream bottles, or other dark glass bottles to store their colloidal silver. 

 

Some people even use inexpensive glass bottles like these, which can be found at Walmart. 

 

You can even wrap duct tape around a clear glass storage container to keep the light out, and store your colloidal silver in that. 

 

If all you have available is a clear glass storage container, one of the simplest solutions is to take a dark sock and pull it up over the container to keep the light out (see a quick “how to” example, here). 

 

The bottom line is that prolonged or frequent exposure to bright light can begin to oxidize your silver particles and cause them to fall out of suspension.  So to extend the potency of your colloidal silver in storage you should always do your best to keep it protected from exposure to bright light.    

A little bit of exposure to light, such as when you’re pouring some colloidal silver out of the storage container to drink or to apply topically is not going to cause a problem.  Again, it’s prolonged or frequent exposure to bright light that causes the oxidation issue. 

 

Factor #2:  Temperature Control

 

Colloidal silver should be stored at room temperature (i.e., between 68-85 degrees), rather than, say, in a garage where temperatures can fluctuate dramatically between daytime and nighttime.

Over the course of time, fluctuating temperatures can cause silver particles to fall out of suspension prematurely, resulting in lost potency.  Keeping your colloidal silver stored in a temperature-controlled climate (such as in a dark cabinet, inside your house) can extend its potency dramatically.  Properly stored colloidal silver can remain potent or years.

 

As an aside, never store colloidal silver in the refrigerator.  That’s because the silver particles are in a state of Brownian Motion, which simply means they repel each other in the water.  This Brownian Motion helps keep your silver particles from clumping together (i.e., agglomeration) and becoming too heavy to remain in suspension.

Indeed, if you could see the billions of submicroscopic silver particles suspended in the water, it would have the appearance of an elaborate (but erratic) dance, with silver particles appearing to collide or near-collide with each other, and then being repelled away from each other, over and over and over again, many times per second. 

 

That’s because the positive electrical charge on each silver particle causes the particles to repel from each other, just as trying to touch the positive ends of two magnets causes them to repel from each other.  So the silver particles in your batch of colloidal silver are constantly moving, quite literally every second. 

 

Visually, think of an elaborate ballet with a dozen ballet dancers on stage all weaving in and out between each other in synergism, and you’ll pretty much get the picture. 

But cold temperatures such as those from a refrigerator will cause that Brownian Motion “dance” to slow down dramatically, which in turn will allow silver particles to begin falling out of suspension. 

 

The bottom line is to keep your colloidal silver batches stored at room temperature, and let the “dance” (i.e., Brownian motion of the suspended silver particles) continue. 

 

Factor #3:  Electro-Magnetic Influences

 

If possible, your colloidal silver should also be stored three or four feet (or more) away from strong electro-magnetic influences such as a microwave oven, or even from a set of large stereo speakers with large magnets in them.

 

That's because prolonged exposure to strong electro-magnetic influences can, over time, disrupt the potency of a batch of colloidal silver. 

 

This is probably the least worrisome of storage problems.  But it’s another factor that colloidal silver users have found in the past to influence the longevity and potency of their colloidal silver batches. 

 

Another Important Factor

 

Of course, there are a number of other factors that can influence how long a batch of colloidal silver will remain potent while in storage. 

 

One of the most important factors is the quality of the water that was used to make the colloidal silver batch. 

 

Only steam distilled water should be used when making colloidal silver, because all other forms of water have loads of mineral content in them.  And over time, the mineral content can rob your silver particles of their electrical charge, causing them to fall out of suspension.

 

Even water produced by reverse osmosis still has too much mineral content in it for making high-quality colloidal silver.

 

This is important to understand, because if you fail to make your colloidal silver with steam-distilled water, over time the excess mineral content in the water will begin to bond with the electrically charged silver particles and rob them of their electrical charge, causing them to fall out of suspension.

So if you’re making batches of colloidal silver and you’re keeping them properly stored as I’ve explained above, but you’re still having problems with silver particles falling out of suspension while in storage, then you’re likely having a problem with mineral content in your water, and you need to make sure you’re using a good, high-quality brand of steam-distilled water.

 

The Bottom Line

 

The bottom line is that colloidal silver will retain full potency quite literally for years if it’s made properly, and stored properly.  If not, it will only retain potency for a few months at best before beginning to fall out of suspension and coat the bottom of the storage bottle.

I have a quart of homemade colloidal silver in my cabinet that’s nearly five years old now, and it’s still just as potent as the day I made it.  But that’s because it’s stored in a dark glass bottle…it’s stored indoors at room temperature…it’s stored away from powerful electro-magnetic influences such as a microwave oven…and it was made with very high-quality steam-distilled water. 


MPG TRANSPARENT BY STEVE.jpg

You can do the same thing, with a brand new Micro-Particle Colloidal Silver Generator from The Silver Edge. 

 

Making high-quality colloidal silver that will retain potency for years and years in storage is so simple I’m still stunned more people don’t do so. 

 

In fact, why anyone would continue to pay $20 to $30 for a tiny 4-ounce bottle of colloidal silver in health food stores (which has probably lost half its potency before you bought it) when you can easily make a full quart of long-lasting, full-potency colloidal silver for about 36 cents, is beyond me. 

 

It’s just plain silly to keep paying those exorbitant mark-ups for health food store colloidal silver when you can make it at actual cost, yourself – just a few cents per one-quart batch! 

Here’s how simple it is to make your own high-quality, super-potent, long-lasting colloidal silver with a Micro-Particle Colloidal Silver Generator from The Silver Edge (i.e., the #1 best-selling colloidal silver generator in the world today):

4 Simple Steps to

Colloidal Silver-Making Perfection!

 

The Micro-Particle Colloidal Silver Generator is so simple to use, anyone can make high-quality micro-particle colloidal silver for less than 36 cents per quart! 

In fact, we have 80-year old grandmothers who make their own colloidal silver! And they wouldn’t give up their Micro-Particle Colloidal Silver Generators for anything! 

Here’s how simple it is to use: 

 

http://colloidalsilverandcancer.com/images/step-1.jpg Just plug the two pure .999 fine silver rods into the two jacks in the bottom of the generator box, one on each side of the bubbler tube.

 

 

 

 

 

http://colloidalsilverandcancer.com/images/step-2.jpg

Sit the generator box on top of a one-quart glass jar full of pure steam-distilled water, so that the two silver rods and the bubbler tube are immersed in the water.

 

 

 

 

http://colloidalsilverandcancer.com/images/step-3.jpg

Set the handy appliance timer for three hours, and plug it into any convenient grounded household electrical outlet.

 

 

 

 

 

 

http://colloidalsilverandcancer.com/images/step-4.jpg

Plug the generator into the timer and then turn the timer wheel clockwise until you hear the generator start bubbling. The generator will shut off automatically after three hours.

 

 

 

 

 

 

It’s really that easy! You just “Set it, and forget it.” And you get a perfect batch of high-quality micro-particle colloidal silver every time

And when you’re finished, you’ll have a full quart of high-quality micro-particle colloidal silver.  And you can make quart after quart for the rest of your life, for less than 36 cents each, or just over a penny per ounce!

 

girl leaning on counter with mpg.jpgThe machine simply runs on its own for three hours. And when you’re finished, you’ll have a full quart of high-quality micro-particle colloidal silver. And you can make quart after quart for the rest of your life, for less than 36 cents each!

 

What’s more, the quality of your homemade colloidal silver is so high it will remain potent for years in storage, if you follow the simple guidelines above. 

 

Why should you ever again pay $20 to $30 for a tiny, four-ounce bottle of colloidal silver at the health food store, when you can make your own superior-quality micro-particle colloidal silver for less than 36 cents per quart?

 

Where to Learn More…

 

If you’re interested in learning more, here’s where I suggest you start:

 

      Read What Real-Life Customers Are Saying -- To read dozens upon dozens of customer reviews and testimonials about the new Micro-Particle Colloidal Silver Generator from the Silver Edge, just click the link in this sentence.

 

      Discover How It Compares to Other Generators – To learn how the Micro-Particle Colloidal Silver Generator compares to conventional colloidal silver generators, and why it’s been the #1 best-selling colloidal silver generator in the world for over seven years running, just click here

 

      Save $100 By Acting Now -- Finally, if you’re ready to order, and you’d like to save a whopping $100 off the cost of a brand new Micro-Particle Colloidal Silver Generator from The Silver Edge during the course of our special sale (next 15 days only), just click this link.

 

And if you have any questions at all, feel free to call one of the knowledgeable Customer Service Representatives at The Silver Edge, toll-free:

 

          1-888-528-0559 (M-F, 8am to 4pm Pacific Standard Time). 

 

They’ll be happy to answer all of your questions, and take your order for your new Micro-Particle Colloidal Silver Generator when you’re ready. No pushy sales pitch.  No pressure. 

 

But keep in mind the special $100 savings mentioned above is available for the next 15 days only

 

So if you’ve ever wanted to start making your own high-quality colloidal silver for about a penny per ounce, this is certainly the time to do it while you can still save a whopping $100 off the usual cost of the world’s #1 best-selling colloidal silver generator! 

 

I promise, you’ll never regret purchasing a high-quality Micro-Particle Colloidal Silver Generator from The Silver Edge!

 

Meanwhile, I’ll be back next week with another great article on colloidal silver….

 

Yours for the safe, sane and responsible use of colloidal silver,

SteveSig2010

Steve Barwick, author
The Ultimate Colloidal Silver Manual

 

Helpful Links:

FREE Colloidal Silver Safe Dosage Report

Colloidal Silver Secrets Group on Facebook

Make Your Own Colloidal Silver for Pennies

.999 Pure Silver Wire for Making Colloidal Silver

Subscribe to the Colloidal Silver Secrets Ezine

Videos on Making and Using Colloidal Silver

Real-Life Colloidal Silver Success Stories

Colloidal Silver Update (News & Views)

The Ultimate Colloidal Silver Manual

The Colloidal Silver Secrets Video

Colloidal Silver Cures MRSA

Colloidal Silver Kills Viruses

Colloidal Silver Secrets blog

Meet Steve Barwick

Colloidal Silver

 

                                                                                                                                                 

Important Note and Disclaimer:  The contents of this Ezine have not been evaluated by the Food and Drug Administration.  Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof.  The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics.  He is not a doctor.  Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice.  Nothing reported herein is intended to diagnose, treat, cure or prevent any disease.  The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage.  Therefore, the information and data presented should be considered for informational purposes only, and approached with caution.  Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein.  All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional.  Readers are solely responsible for their choices.  The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine. 

 

Copyright 2016 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.